Serving the Dallas–Fort Worth metroplex Call us: (817) 900-2915
Book an Appointment

RV Lifetime Roof in DFW

A seamless, spray-applied polyurea roof that replaces your rubber membrane for good — no seams, no lap sealant, no more resealing. Ever.

Book an Appointment Call (817) 900-2915

The Last Roof Your RV Will Ever Need

Every rubber roof — EPDM or TPO — is a countdown. The membrane chalks and thins under UV, the self-leveling sealant around every vent, skylight, and A/C unit cracks in the Texas sun, and the whole system demands inspection and re-caulking twice a year just to stay watertight. Miss one season and water finds the seams.

A lifetime roof ends the countdown. We strip the old membrane, repair the decking underneath, and spray-apply polyurea — the same class of elastomeric coating used on truck bed liners and industrial containment — as one continuous, seamless layer across the entire roof and up every penetration. No seams. No caulk lines. Nothing to reseal, this year or any year after.

Why Polyurea Belongs on an RV Roof

  • Seamless and monolithic — the roof becomes one piece, so there are no joints for water to work open
  • Extreme tear strength — on the order of 3,500 psi, versus a rubber membrane you can puncture with a dropped tool or a low branch
  • Flexible where it counts — over 600% elongation, so it moves with the roof through DFW's 20-to-105-degree swings instead of cracking
  • Hail resistant — a serious advantage in North Texas, where hail is the #1 killer of rubber roofs
  • UV stable — no chalking, no white streaks down your sidewalls
  • Fast-curing — sprayed material sets in seconds, so the build is controlled and consistent

How the Installation Works

  1. Strip and inspect. The old EPDM or TPO membrane comes off completely — we don't spray over problems.
  2. Repair the substrate. Soft spots, delaminated decking, and water-damaged framing get fixed first.
  3. Set new flanges. A/C units, vents, skylights, and antennas are removed and new mounting flanges installed.
  4. Spray the polyurea. One continuous membrane, roof edge to roof edge, up and over every penetration.
  5. Remount and verify. Components go back on, everything is tested, and you leave with a written, transferable lifetime no-leak warranty.

Typical time in the shop is two to three days.

Storm-damaged roof? If hail took out your rubber roof, your comprehensive policy may fund most of the replacement — and putting the payout toward a lifetime roof instead of another membrane means never filing that claim again. We handle the insurance estimate and documentation.

Lifetime Roof vs. Another Rubber Membrane

Re-membraning with EPDM or TPO costs less on day one, but it re-enrolls you in the maintenance cycle: sealant checks every spring and fall, recoating, and another full replacement in a decade. The spray-on polyurea system is a one-time investment that removes roof maintenance from your ownership costs entirely — and because the no-leak warranty is written and transfers with the RV, it's a genuine selling point at resale. Not sure your roof needs replacing at all? Start with a free roof inspection and we'll tell you honestly where your membrane stands.

Frequently Asked Questions

What is an RV lifetime roof?

It’s a seamless, spray-applied polyurea roof that permanently replaces your RV’s rubber membrane. Instead of an EPDM or TPO sheet held down with adhesive and sealed with caulk, the entire roof becomes one monolithic elastomeric membrane with no seams to split and no lap sealant to maintain — backed by a lifetime no-leak warranty.

How is polyurea different from roof coatings I can roll on myself?

Night and day. Roll-on and brush-on coatings (acrylic, silicone, liquid rubber) are thin toppings over your existing membrane — they still depend on the old roof underneath and typically need recoating every few years. Spray-applied polyurea is a structural membrane in its own right: applied thick, cured in seconds, with tear strength around 3,500 psi and over 600% elongation. It replaces the roof rather than painting it.

Does a lifetime roof really eliminate resealing?

Yes — that’s the core of it. Roof components are removed, new flanges are set, the polyurea is sprayed as one continuous layer, and the components are remounted. There are no seams and no caulk lines to inspect twice a year, which is what makes the no-maintenance, lifetime no-leak warranty possible.

How long does installation take?

Plan on roughly two to three days in the shop. That covers stripping the old membrane, repairing any soft spots or water-damaged decking, setting flanges, spraying the polyurea, and remounting your A/C units, vents, skylights, and antennas.

Can it be applied over hail damage or a leaking roof?

The damage gets fixed first — spraying over rotten decking just hides a problem. We repair the substrate, then apply the new roof. If the damage came from a storm, an insurance claim may cover much of the project; we prepare the estimate and documentation.

Is it worth the cost compared to a new rubber roof?

A new EPDM or TPO membrane costs less up front but restarts the same clock: resealing every season, re-membrane in 10–12 years, and leak risk in between. A polyurea lifetime roof is a one-time buy that usually adds resale value, since the no-leak warranty is written and transferable to the next owner. For owners keeping their rig more than a few years, the math tends to favor it.

Ready to Get Your RV Back on the Road?

Call us or send a message and we'll get you scheduled. Clear estimates before any work begins — no surprises.

Book an Appointment Call (817) 900-2915